CV Brake Pads Vulcanizing Hot Press Machine is the most popular type press machine used for making both passenger car and commercial vehicle brake pads, with its high production efficiency, and good production quality. One operator can handle 2 units such press machines, very efficient and labor saving. Technical Parameters： – Max Clamping Force: 400Ton(4000KN) – Heating…
Brake Pads Equal Pressure Hot Press Machines are the most advanced type press machines used for making OE qualified high end passenger car brake pads, with its high production efficiency, and good production quality. The machine adopts advanced floating cylinder design to ensure that each brake pad in the same mold is subject to the…
Brake Pads Friction Wear Test Machine provides precise data on frictional material performance and wear characteristics in accordance with Chinese Standard GB5763－98; GB5764－98 and Japanese Standard JIS D4411-1993. Technical Parameters： – Friction plate：Material HT250; Hardness：HB180－220； – Rotating speed: 480 ± 10 r/min; – Driving motor: 7.5 kw, 970 r/min; – Sample Size: 25 x 25mm; Thickness: 5 – 7…
Car Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy:…
CV Brake Lining Hot Press Machine is an automatic press machine combined with the automatic materials weighting and feeding machine, and an automatic pick-up robot. It not only can increase the working efficient, and also save the labor cost in production. lTechnical Parameters： Click To See More Brake Lining Machines
Motorcycle Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
CV Brake Linings Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Car Brake Pads Slanted Slot and Chamfer Machine is used to process the special slant slot and chamfering on brake pads with automatcally. Technical Parameters： Size of the machine(L x W x H): 2200mm x 1200mm x 1500mm Weight: 1.5 Ton Productivity: 600 pcs / hour Slotting: 2 x 4KW motors (2900/min), Ø250 diamond cutter…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: Designing Concept： This automatic equipment is divided into 5 blocks: Block…