Automatic CV Brake Pads Friction Mixes Weighing Machine is used to weigh the friction mixture and divide then into small cups according the set weight of input raw materials for brake pads. Material tank can be divided into two bins, and weigh two different mixture at the same time. Technical Parameters： BL-PC46–FMW(for pc brake pads)…
CV Brake Linings Automatic Packing Line is used for packing finished Brake Pads, brake linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
Motorcycle Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
Brake Pads Sand Blasting Machine is used for cleaning the out surface of a finished brake pad by silicon sands to present a clean and smooth appearance before powder coating, which is equipped with an Air Compressor to blow out silicon sands. Technical Parameters： – Working Room Size: Width ≤500mm – Application Range: Metal or Nonmetal…
CV Brake Lining Side Painting Machine is used to painting different colors on the both sides of Brake Linings with automatically. Technical Parameters: CV Brake lining size range. -Inner arc radius: R142-R245 Width. -Width: ≤254mm -CV Brake Linings Thickness: ≤30mm Spray Gun: 2 Pcs Working Efficiency:1000-1200pcs/hour Size: 1340x1060x1420mm Weight: 200KG Click To See More Brake Lining Machines
Car Brake Shoes Outer Arc Grinding Machine is used for grinding the assembled passenger car and light truck brake shoe after bonding together. Technical Parameters： 1. Emery wheel diameter: 240 mm 2. Emery wheel height: 50 – 80m 3. Radius of brake shoe assembly: 85 – 160 mm (customized according customer’s requirement) 4. Diameter of Dusting hole: 118mm Click To See More Car Brake…
Motorcycle Brake Shoes Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Motorcycle Brake Shoes Machines
CV Brake Pads Roller Gluing Machine for brake pad back plates, which includes three parts in this machine, which is widely used in brake pad factory, with a higher production efficiency, and good gluing performance. Technical Parameters： – ROLLER GLOWING MACHINE Adhesive Machine Infrared Heating Tunnel Fan Cooling Tunnel – ADHESIVE PART : Gluing Roller:…
Motorcycle Brake Shoe Die Casting Machine is used for making brake shoe Iron automatic by Die Casting Technology, this system consists of five parts: 1. Die casting system; 2. Semi-closed control cabinet; 3. Injection curve display; 4. Automatic Injection machine; 5. Upright spraying machine Specification: Clamping Part 1. Clamping: 1600 KN 2. Stroke: 380 mm 3. Capacity modulus(Min. – Max.): 200 – 550 mm…