Automatic Brake Pads Friction Mixes Weighing Machine is used to weigh the friction mixture and divide then into small cups according the set weight of input raw materials for brake pads. Material tank can be divided into two bins, and weigh two different mixture at the same time. Technical Parameters： BL-PC46–FMW(for pc brake pads) Working…
Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
Motorcycle Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates…
Brake Lining Holes Drilling and Warning Indicator Cuts Machines is used to process the holes and warnning cuts on different sizes of Brake Linings. Processing Range: R180mm-R205mm Width Range: 150mm-230mm Holes Shape: Adjustable Motor: 7 KW Feeding: Manual or Automatic Production Capacity: 1300pcs-1800pcs/8 hours Dust Collector: φ114mm*1pcs;φ50mm*2pcs Machine Size: 1350mm*1250mm*1900mm Machine Weight: 1300KGS Click To…
Brake Pads Back Plates Gluing Painting Room is assembled from several units including painting room, painting system, spray gun transmission device, tray transmission system, exhaust gas treatment system, etc. Configuration and Technical Parameters: Painting room size: 1900×2860×2130mm Chain center distance: 650mm Operating height: 800±50mm Painting System: Spray gun: Japan Iwata spray gun WA200-1.2 caliber Working…
Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
Brake Lining Resin Pulverizer Machine is designed for grinding the resin into production level granule size, raw material is fed into the grinding chamber via hopper by spiral feeder, cut into powder particles by high speed cutters, then moved into separator by wind generated by motor, this method is called negative pressure sucking method. No…
Car Brake Pad Scorching Machine is used for friction surface high temperature scorching treatment, to carbonize the surface of OE quality Brake Pads. It consists with scorch oven and cooling zone with one line. It is continuous operation type and no delaying time. Brake pad moves on electrical heated plate without pressure. Scorching time and…
CV Brake Lining Hot Press Machine is an automatic press machine combined with the automatic materials weighting and feeding machine, and an automatic pick-up robot. It not only can increase the working efficient, and also save the labor cost in production. lTechnical Parameters： Click To See More Brake Lining Machines