Brake Pads Friction Materials-Nitrile Butadiene Rubber(NBR) also known as Butadiene Acrylonitrile rubber, is a widely used friction material adhesive, with good cold resistance, abrasion resistance, oil resistance, and elasticity. Rubber powder works not only as the binder, but also as an inorganic filler in the friction materials. It can be evenly mixed with resin to…
CV Brake Lining Side Chamferring Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines
Motorcycle Brake Pads Hot Press Machines are the most popular type press machines used for making both passenger car and commercial vehicle brake pads, with its high production efficiency, and good production quality. One operator can handle 2 units such press machines, very efficient and labor saving. Technical Parameters： Model: BL-400T-HP Max Clamping Force:400Ton(4000KN) Heating…
Motorcycle Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled….
Motorcycle Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
Automatic CV Brake Shoe Riveting Machine is designed for riveting the CV Brake Linings onto the steel CV brake shoe backs. It is a high degree of automation machine, with simple operation, only one ordinary operator can complete the work. Full digital control, full monitoring of riveting stroke and pressure, complete preservation of production data….
PRODUCTION DESCRIPTION： Brake Pads Friction Material-Fiber Steel Wool is a friction raw material filler, can be used in all kinds of friction materials. It can provide the friction products excellent stable performance over a wide temperature range, with low wear rate and good heat dissipation. Chopped steel fiber is made from high quality low carbon…
Brake Pads Back Plates Production Line is an automatic production machine for punch the brake pad back plates. Technical Specifications: Sliding Block Pressure: 1250KN Sliding Block Stroke:180mm Stoke Numbers:50 times/min (fixed);35-50 times/min (alterable) Die Height:350mm Die Height Adjustment:90mm Dimension From Slider Centreline to Machine:350mm Slider Base Size:620mm (L/R)*520mm(F/B) Shank Hole Size:70mm(diameter);90mm(depth) Work Table Size:1100mm (L/R)*680mm(F/B)…
CV Brake Lining Side Painting Machine is used to painting different colors on the both sides of Brake Linings with automatically. Technical Parameters: CV Brake lining size range. -Inner arc radius: R142-R245 Width. -Width: ≤254mm -CV Brake Linings Thickness: ≤30mm Spray Gun: 2 Pcs Working Efficiency:1000-1200pcs/hour Size: 1340x1060x1420mm Weight: 200KG Click To See More Brake Lining Machines