Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled. –…
The Automatic Brake Lining Hole Drilling Machine is an innovative and highly efficient piece of equipment designed specifically for Brake Linings Machinery Factories. It has revolutionized the process of drilling rivets holes in CV brake linings, making it completely automatic. This state – of – the – art machine, which can also be categorized among…
Brake Pad Backing Plates Punch Machine is a machine to puch the brake pad back plates for car Brake Pads and truck brake pads. Technical Specifications: Sliding Block Pressure: 3150KN Sliding Block Stroke: 250mm Stoke Numbers: 30 times/min (fixed);20-30 times/min (alterable) Die Height: 500mm Die Height Adjustment:120mm Dimension From Slider Center line to Machine:450mm Slider…
Motorcycle Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr: 2300pcs/hr,…
Motorcycle Brake Pad Scorching Machine is used for friction surface high temperature scorching treatment, to carbonize the surface of OE quality Brake Pads. It consists with scorch oven and cooling with one line.It is continuous operation type and no delaying time. Brake pad moves on electrical heated plate without pressure. And also, scorching time and temperature…
CV Brake Lining Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Shoes Machines
Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
Brake Pad Back Plates Punch Machine is a machine for brake pad back plates production, it can be used for punching holes, pins, sides and fine blanking. Technical Specifications: Sliding Block Pressure: 1600KN Sliding Block Stroke:200mm Stoke Numbers:45 times/min (fixed);30-45 times/min (alterable) Die Height:400mm Die Height Adjustment:100mm Dimension From Slider Centreline to Machine:400mm Slider Base…
Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy: 0.01mm…