Car Brake Pads Slot and Chamfering Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880…
Car Brake Shoes Automatic Packing Line is used for packing finished Brake Pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
Brake Pads Sand Blasting Machine is used for cleaning the out surface of a finished brake pad by silicon sands to present a clean and smooth appearance before powder coating, which is equipped with an Air Compressor to blow out silicon sands. Technical Parameters： – Working Room Size: Width ≤500mm – Application Range: Metal or Nonmetal…
Motorcycle Brake Shoes Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will get…
Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters： Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Pads Equal Pressure Hot Press Machines are the most advanced type press machines used for making OE qualified high end passenger car brake pads, with its high production efficiency, and good production quality. The machine adopts advanced floating cylinder design to ensure that each brake pad in the same mold is subject to the…
Motorcycle Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates…
Motorcycle Brake Shoe&Brake Lining Gluing Machine is to spray the glue on both the brake shoe aluminum parts and the friction brake lining. Technical Parameters： Total Power: 30 KW Machine Size: 9000mm*1400mm*1000mm Heating Pipe: Infrared Transfer Type: Mesh Conveyor Wind Motor: 0.75KW*3 Temperature: Automatic PLC Control Glue Tank: 40 L Production Capacity: 30000-40000 Pcs/8 hours…