No products were found matching your selection.
Other Related Products
-
Motorcycle Brake Shoes Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
-
Car Brake Pads Slot and Chamfering Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880…
-
Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr: 2300pcs/hr,…
-
This machine is designed to coat the brake-in strips on the friction surface. The pattern of the strips is depending by the roller width of the gluing head, it shall be determined when manufacturing the machines. Coating Head:-The curing time:80-150 ℃, 4-8 minutes.-Gluing Roller: 1 pcs-Adhesive Speed: 0-5 m/min-Production Capacity: 1000 pcs/hour-Adhesive Machine Size: 1500mm…
-
Motorcycle Finished Brake Shoe Out Arc Grinder is used to grinding the out arc surface of Brake Shoes after assembled with the brake shoe, to control the size of parts. Technical Parameters： Grinding Motor: 3 KW Motor Speed: 2880 times/minute Grinding Wheel Diameter: φ200mm*35mm Grinding Range: φ90mm-200mm Control: PLC Click To See More Motorcycle Brake…
-
Car Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr:…
-
Motorcycle Brake Pads Roller Gluing Machine for brake pad back plates, which includes three parts in this machine, which is widely used in brake pad factory, with a higher production efficiency, and good gluing performance. Technical Parameters： – ROLLER GLOWING MACHINE Adhesive Machine Infrared Heating Tunnel Fan Cooling Tunnel – ADHESIVE PART : Gluing Roller:…
-
Car Brake Pads Slanted Slot and Chamfer Machine is used to process the special slant slot and chamfering on brake pads with automatcally. Technical Parameters： Size of the machine(L x W x H): 2200mm x 1200mm x 1500mm Weight: 1.5 Ton Productivity: 600 pcs / hour Slotting: 2 x 4KW motors (2900/min), Ø250 diamond cutter…
-
Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Pad Machines
