Car Brake Shoe Lining Cutting Machine is used to cutting the Brake Linings into pieces according to parts sizes. Technical Parameters： Electric Power: 380V 50HZ Production Capacity: 15 Cycles/Minute, Speed Adjustable. Cutting Knifes: Diamond Cutting Knifes Fixtures: 45# Steel Electric Motor: Cutting Axle 5.5KW, Mold Axle 0.55KW. Processing Accuracy: -Cutting Width:≤0.10mm -Parallelism Between Cutting Axle…
Motorcycle Brake Shoes Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will get…
Motorcycle Finished Brake Shoe Out Arc Grinder is used to grinding the out arc surface of Brake Shoes after assembled with the brake shoe, to control the size of parts. Technical Parameters： Grinding Motor: 3 KW Motor Speed: 2880 times/minute Grinding Wheel Diameter: φ200mm*35mm Grinding Range: φ90mm-200mm Control: PLC Click To See More Motorcycle Brake…
Car Brake Shoes Steel Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
Motorcycle Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
CV Brake Pads Vulcanizing Hot Press Machine is the most popular type press machine used for making both passenger car and commercial vehicle brake pads, with its high production efficiency, and good production quality. One operator can handle 2 units such press machines, very efficient and labor saving. Technical Parameters： – Max Clamping Force: 400Ton(4000KN) – Heating…
Car Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive…
Brake Lining Side Chamferring Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines
Car Brake Pads Riveting Machine is used for riveting some kits on the finished brake pads, such as wear indicator plate, retaining clips after code printing before package. Technical Parameters： Work Pressure: 5-10MPa Effective Travel:100mm Height:210mm Riveting Span:220mm Power: 1.1KW/380V Dimension: 640×520×1030 mm Weight: 140Kg Click To See More Brake Pad Machines