Car Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive…
Brake Lining Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Lining Machines
Car Brake Pad Back Plates Production Machine is a production machine for car Brake Pads Back Plates, with automatic feeding and moving robots. Technical Specifications: Sliding Block Pressure: 800KN Sliding Block Stroke:160mm Stoke Numbers:60 times/min (fixed);40-60 times/min (alterable) Die Height:320mm Die Height Adjustment:80mm Dimension From Slider Centreline to Machine:310mm Slider Base Size:540mm (L/R)*460mm(F/B) Shank Hole…
CV Brake Lining Side Painting Machine is used to painting different colors on the both sides of Brake Linings with automatically. Technical Parameters: CV Brake lining size range. -Inner arc radius: R142-R245 Width. -Width: ≤254mm -CV Brake Linings Thickness: ≤30mm Spray Gun: 2 Pcs Working Efficiency:1000-1200pcs/hour Size: 1340x1060x1420mm Weight: 200KG Click To See More Brake Lining Machines
Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
Car Brake Shoe Lining Cutting Machine is used to cutting the Brake Linings into pieces according to parts sizes. Technical Parameters： Electric Power: 380V 50HZ Production Capacity: 15 Cycles/Minute, Speed Adjustable. Cutting Knifes: Diamond Cutting Knifes Fixtures: 45# Steel Electric Motor: Cutting Axle 5.5KW, Mold Axle 0.55KW. Processing Accuracy: -Cutting Width:≤0.10mm -Parallelism Between Cutting Axle…
Car Brake Pads Electrostatic Powder Coating Line applies Infrared Heating Technology, which is 30-50% energy saving compared to electric heating technology with same electric power, the ordinary electric heating tunnel applies heat conduction to transfer the heat energy to brake pads, however, the infrared heating tunnel applies thermal radiation by special short and medium infrared…
CV Brake Shoes Steel Punching Machine is used for blanking rolling plate,punching holes for rolling plate and tendon plate for Commercial Vehicles Brake Shoe. Specification: 1. Nominal force：400 T 2. Table size：L-R:1250mm,F-B:1250mm 3. Outline:3500mm 4. Dimension:6000mm 5. Main Motor:22Kw Click To See More Brake Shoes Machines
Car Brake Pads Automatic Packing Line is used for packing finished brake pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…