Automatic Motorcycle Brake Shoes Weighing and Pressing Machine Group is made up of three machines, including the hot press machines, material weighting and feeding machine, and the automatic loading robot hand. It reduce the workers to operate the machines, which save the labor cost and also guarantee a safety during production. A: Automatic Material Weighting&Feeding Machine…
Brake Pads Back Plates Gluing Painting Room is assembled from several units including painting room, painting system, spray gun transmission device, tray transmission system, exhaust gas treatment system, etc. Configuration and Technical Parameters: Painting room size: 1900×2860×2130mm Chain center distance: 650mm Operating height: 800±50mm Painting System: Spray gun: Japan Iwata spray gun WA200-1.2 caliber Working…
Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
CV Brake Linings Hot Curing Oven is used for Brake Pads, brake linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
Car Brake Pad Back Plates Production Machine is a production machine for car Brake Pads Back Plates, with automatic feeding and moving robots. Technical Specifications: Sliding Block Pressure: 800KN Sliding Block Stroke:160mm Stoke Numbers:60 times/min (fixed);40-60 times/min (alterable) Die Height:320mm Die Height Adjustment:80mm Dimension From Slider Centreline to Machine:310mm Slider Base Size:540mm (L/R)*460mm(F/B) Shank Hole…
‘- Motorcycle Brake Shoe Lining Outer Arc Grinding Machine is used for grinding outer arc for motorcycle brake shoe lining . – The product scope widely “L” shape body structure, shorten the length of the mill spindle, increase the rigidity of it. – Decrease the height of working table and worker’s intensity. – Speed promise, also…
CV Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…