CV Brake Lining Side Chamferring Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines
Car Brake Shoe Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings, and it is highly working conditions and efficiency. Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide…
CV Brake Linings Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Motorcycle Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
CV Brake Lining Warning Sensor Cutting Grinder is a machien to process the warning sensor cuts on the CV Brake Linings with high working performance. Technical Parameters： Machine size:1350MM*1050MM*1750MM Production Capacity:5000-5500pcs / 8hours Processing Range: R180-R205 Width: 150-230mm Total Power: 2.2kw Machine Weight: 800kg
Car Brake Pads Automatic Packing Line is used for packing finished brake pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…
Passenger Car Brake Shoe Lining Inner Arc Grinder is used for grinding the inner surface of brake shoe lining. It applies rubber wheel to hold the Brake Linings and convoy them in and out. It uses emery grinding wheels to grind the surface with parallel grinding lines. Technical Parameters： 1. Size of Emery Grinding Wheels: φ140 X…
The Car Brake Pads Electrostatic Powder Coating Line, an essential component of Brake Pads Machinery, represents a cutting – edge solution that revolutionizes the powder coating process for brake pads. This advanced line, also known as one of the Brake Pads Powder Coating Equipments, Brake Pads Powder Coating Machinery, or Brake Pads Powder Coating Machines,…