CV Brake Shoes Linings Automatic Packing Line is used for packing finished Brake Pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min…
Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Pad Machines
Brake Pads Friction Materials-Silica Powder, is also purified from siliCarenite or sand stone. It is widely used as an inorganic friction raw material filler. Silica powder improves the friction products’ wear resistance, as well as the friction coefficient. Silica is a high Mohs scale of hardness filler, it need to be grinded into very small…
Brake Lining Resin Pulverizer Machine is designed for grinding the resin into production level granule size, raw material is fed into the grinding chamber via hopper by spiral feeder, cut into powder particles by high speed cutters, then moved into separator by wind generated by motor, this method is called negative pressure sucking method. No…
Car Brake Shoes Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Car Brake Shoes Machines
CV Brake Lining Warning Sensor Cutting Grinder is a machien to process the warning sensor cuts on the CV Brake Linings with high working performance. Technical Parameters： Machine size:1350MM*1050MM*1750MM Production Capacity:5000-5500pcs / 8hours Processing Range: R180-R205 Width: 150-230mm Total Power: 2.2kw Machine Weight: 800kg
Automatic Motorcycle Brake Shoes Weighing and Pressing Machine Group is made up of three machines, including the hot press machines, material weighting and feeding machine, and the automatic loading robot hand. It reduce the workers to operate the machines, which save the labor cost and also guarantee a safety during production. A: Automatic Material Weighting&Feeding Machine…
Brake Pads Sand Blasting Machine is used for cleaning the out surface of a finished brake pad by silicon sands to present a clean and smooth appearance before powder coating, which is equipped with an Air Compressor to blow out silicon sands. Technical Parameters： – Working Room Size: Width ≤500mm – Application Range: Metal or Nonmetal…
Motorcycle Brake Pads Electrostatic Powder Coating Line applies Infrared Heating Technology, which is 30-50% energy saving compared to electric heating technology with same electric power, the ordinary electric heating tunnel applies heat conduction to transfer the heat energy to brake pads, however, the infrared heating tunnel applies thermal radiation by special short and medium infrared…