Brake Pads Backing Plates Deburring Machine is used to clean the burrs on sides of Brake Pads Back Plates after the punching process. Technical Parameters： Size of the machine(L x W x H): 1900mm x 800mm x 1050mm Size of backing plate: Max. 30mm x 350mm Production capacity: 16000 pcs/ hour Working Table: Speed: 0-…
Car Brake Pads Friction Wear Test Machine provides precise data on frictional material performance and wear characteristics in accordance with Chinese Standard GB5763－98; GB5764－98 and Japanese Standard JIS D4411-1993. Technical Parameters： – Friction plate：Material HT250; Hardness：HB180－220； – Rotating speed: 480 ± 10 r/min; – Driving motor: 7.5 kw, 970 r/min; – Sample Size: 25 x 25mm; Thickness: 5 –…
Motorcycle Brake Shoe Linings Combined Grinding Machine is used for process the inner arc, out arc, side chamfering and cutting of brake shoe linings Technical Parameters： Out Arc Grinding Motor: 5 KW Inner Arc Grinding Motor: 5 KW Chamfering Motor: 2 KW Cutting Motor: 3 KW Machine Size: 4400mm*1200mm*1500mm Working Capacity: 30000 pcs/8 hours Click…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: Designing Concept： This automatic equipment is divided into 5 blocks: Block…
CV Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Pad Steel Back Plates Machine 4000KN is a punch machine for blanking process of Brake Pads Backing Plates, with stable working performances! Technical Specifications: Sliding Block Pressure: 4000KN Sliding Block Stroke:200mm Stoke Numbers:25 times/min Die Height: 600mm Die Height Adjustment:120mm Dimension From Slider Centreline to Machine:1050mm Slider Base Size:1050mm (L/R)*1050mm(F/B) Shank Hole Size:80mm(diameter);90mm(depth) Work…
Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy: 0.01mm…
Brake Lining Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Lining Machines
Brake Pad Back Plates Punch Machine is a machine for brake pad back plates production, it can be used for punching holes, pins, sides and fine blanking. Technical Specifications: Sliding Block Pressure: 1600KN Sliding Block Stroke:200mm Stoke Numbers:45 times/min (fixed);30-45 times/min (alterable) Die Height:400mm Die Height Adjustment:100mm Dimension From Slider Centreline to Machine:400mm Slider Base…