Car Brake Shoes Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
CV Brake Pads Slot Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880 rev /…
Combined Brake Shoes Lining Grinding Machine applies overlap-type frame, it can realize automatic load in and load out. it can process sides chamfering, inner arc grinding, and dust brushing. It solves the problems of weak synchronization of old technology grinder. It’s convenient to adjust the grinding motor, and easy to adjust the “R” size accuracy. The newly position…
Car Brake Shoe Lining Inner Arc Grinding Machine for the internal radius of brake cutting linings, which can process an accurate size and qualified surface on the inner surface of cutting linings, to provide a good combination performance of the Brake Linings. Technical Parameters： Linings Process Range: Diameter＞60mm Feeding Speed: 1.7m/minute Main Axle Power: 3KW/2880…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…
Motorcycle Brake Shoes Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
Brake Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide Block Speed: Fast Down (200mm/s); Slow Down(60mm/s); Slow Close Mould…
Motorcycle Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
CV Brake Linings Automatic Packing Line is used for packing finished Brake Pads, brake linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…