Brake Pads Brake-In Strips Gluing Machine is designed to coat the brake-in strips on the friction surface. Coating different pattern of the glue strips shall change the pattern molds on this machine. Technical Parameters： Size of the machine(L x W x H): 650mm x 800mm x 1600mm Working Table Size(L x W): 280mm x 350mm…
Motorcycle Brake Pads Slot Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880 rev /…
CV Brake Lining Combined Grinding Machine is a machine to pricess the inner arc, out arc and side chamfering of CV Brake Linings. Technical Parameters： CV Brake Lining Combined Grinding Machine Click To See More Brake Lining Machines
Vertical Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
CV Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
CV Brake Pads Strips Gluing Machine is designed to coat the brake-in strips on the friction surface. Coating different pattern of the glue strips shall change the pattern molds on this machine. Technical Parameters： Size of the machine(L x W x H): 650mm x 800mm x 1600mm Working Table Size(L x W): 280mm x 350mm…
Brake Pads Friction Material- Wollastonite is a widely used friction material reinforced fiber, which is gradually replace asbestos as a main reinforced fiber during the friction material production, such as Brake Linings, brake pads, and other brake system friction material. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Length of Fiber (lf): 0.384mm Diameter of Fiber (df): 20μm Length to Diameter Ratio…
CV Brake Lining Hot Press Machine is an automatic press machine combined with the automatic materials weighting and feeding machine, and an automatic pick-up robot. It not only can increase the working efficient, and also save the labor cost in production. lTechnical Parameters： Click To See More Brake Lining Machines
