Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive motor…
Motorcycle Finished Brake Shoe Tunnel Type Oven is used to combined the brake shoe and friction linings by heating in the hot oven, Technical Parameters： Total Power: 90 KW Machine Size: 21000mm*1150mm*1300mm Heating Pipe: Stainless Heating Pipe Transfer Type: Mesh Conveyor Wind Motor: 0.37KW*5 Temperature: Automatic PLC Control Production Capacity: 3000 sets/8 hours Click To…
Automatic Brake Pads Friction Mixes Weighing Machine is used to weigh the friction mixture and divide then into small cups according the set weight of input raw materials for brake pads. Material tank can be divided into two bins, and weigh two different mixture at the same time.
Brake Pads Brake-In Strips Gluing Machine is designed to coat the brake-in strips on the friction surface. Coating different pattern of the glue strips shall change the pattern molds on this machine. Technical Parameters： Size of the machine(L x W x H): 650mm x 800mm x 1600mm Working Table Size(L x W): 280mm x 350mm…
Brake Shoes Lining Warning Line Grinding Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Shoes Machines https://www.youtube.com/watch?v=HG6nOJ_P5UM
Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
Motorcycle Brake Shoe Linings Combined Grinding Machine is used for process the inner arc, out arc, side chamfering and cutting of brake shoe linings Technical Parameters： Out Arc Grinding Motor: 5 KW Inner Arc Grinding Motor: 5 KW Chamfering Motor: 2 KW Cutting Motor: 3 KW Machine Size: 4400mm*1200mm*1500mm Working Capacity: 30000 pcs/8 hours Click…
Vertical Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Pad Backing Plates Punch Machine is a machine to puch the brake pad back plates for car Brake Pads and truck brake pads. Technical Specifications: Sliding Block Pressure: 3150KN Sliding Block Stroke: 250mm Stoke Numbers: 30 times/min (fixed);20-30 times/min (alterable) Die Height: 500mm Die Height Adjustment:120mm Dimension From Slider Center line to Machine:450mm Slider…