CV Brake Pads Brake-In Strips Gluing Machine is designed to coat the brake-in strips on the friction surface. Coating different pattern of the glue strips shall change the pattern molds on this machine. Technical Parameters： Size of the machine(L x W x H): 650mm x 800mm x 1600mm Working Table Size(L x W): 280mm x…
The Car Brake Pads Electrostatic Powder Coating Line, an essential component of Brake Pads Machinery, represents a cutting – edge solution that revolutionizes the powder coating process for brake pads. This advanced line, also known as one of the Brake Pads Powder Coating Equipments, Brake Pads Powder Coating Machinery, or Brake Pads Powder Coating Machines,…
Motorcycle Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Shoes Steel Plates Punching Machine is used for punching tendon plate for Commercial Vehicles brake shoe.. Specification: 1. Nominal force：630 T 2. Valid square of working table：L-R:1600mm,F-B: 1600mm 3. Main Motor:44Kw 4. Weigh: 33T Click To See More Brake Shoes Machines
Light Truck Brake Lining Holes Drilling Machine is a machine to drilling the holes on the light truck Brake Linings. Technical Parameters： Processing Range:R160 – R165 Product Height:30mm – 130mm Working Efficiency:1800-2500 pcs/8 hours Size:1350MM*1350MM*1800MM Machine Weight: 1200kg Total Power:7kw
CV Brake Shoes Linings Automatic Packing Line is used for packing finished Brake Pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min…
CV Brake Pad Back Plates Punch Machine is a punch machine for producing the CV brake pad back plates, can be connected with mechanical robots. Technical Specifications: Sliding Block Pressure: 5000KN Sliding Block Stroke:200mm Stoke Numbers:22 times/min (fixed) Die Height:500mm Die Height Adjustment:130mm Dimension From Slider Centreline to Machine:450mm Slider Base Size:820mm (L/R)*500mm(F/B) Shank Hole…
Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
Motorcycle Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…