Vertical Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Car Brake Pads Laser Printing Machine is used for printing all kinds of logo and words on the surface of finished brake pads, pc brake shoe linings, cv Brake Linings, anti-noise shims as well as backing plates. It’s clean, safe and fast, and can be connected into the automatic production line with other machines. Technical…
Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Introduction: Brake Pads Backing Plates Cleanning Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification Size:L8565mm*W2120*H1290mm Load and Lay Off Material Platform (Length/Width):Each With 500×440mm Cleaning Tank Size:L2300×W440×H200mm Spray Rinse Size:L800×W440×H150mm Compressed Air Cutting Water Inner Size:L600×W440×H150mm Hot Oven Size:L2998×W440×H150mm Conveyor Belt Width:400mm Liquid Storage Tank:L700*2 Voltage:220V±15`HZ;380V±15% 50HZ Ultrasonic…
Motorcycle Brake Shoes Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Motorcycle Brake Shoes Machines
Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive motor…
Motorcycle Brake Pads Backing Plates Gluing Machine adopts glue spraying room, conveyor, touch screen control, pneumatic system. The steel backing plates are put on the customized spray adhesive tablets by workers, automatically sent to spray adhesive by conveyor, automatically put in the spray adhesive and then into the connected oven to dry and cool. Spray…
Brake Pad Back Plates Flatting Machine is a hydraulic press machine to flatting the Brake Pads Back Plates, to ensure a qualified flatness. Technical Specifications: Height to the Opening Hole: 550mm Assembly Size: 600mm(left to right)x600mm(front to rear) Working Length: 350mm Motor/pump: 4KW (6 electrodes), 25L Height of the Working Table: 800mm Down-link Speed: 350mm/s…
Car Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy:…