Brake Lining Side Chamferring Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines
Brake Pads Disc Grinding Machine is to process the surface grinding of all kinds of brake pads, which doesn’t require fixtures to hold brake pads, brake pads are all fixed on the grinder disc by electromagnets. It can do fine grinding, coarse grinding and dust cleaning at the same time. It also equipped with step-less speed…
Brake Shoe Steel Shot Blasting Machine is used for surface cleaning of Brake Shoes steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will get…
CV Brake Lining Hot Press Machine is an automatic press machine combined with the automatic materials weighting and feeding machine, and an automatic pick-up robot. It not only can increase the working efficient, and also save the labor cost in production. lTechnical Parameters： Click To See More Brake Lining Machines
Brake Pads Friction Materials-Nitrile Butadiene Rubber(NBR) also known as Butadiene Acrylonitrile rubber, is a widely used friction material adhesive, with good cold resistance, abrasion resistance, oil resistance, and elasticity. Rubber powder works not only as the binder, but also as an inorganic filler in the friction materials. It can be evenly mixed with resin to…
Motorcycle Brake Shoes Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and brake shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Motorcycle Finished Brake Shoe Out Arc Grinder is used to grinding the out arc surface of Brake Shoes after assembled with the brake shoe, to control the size of parts. Technical Parameters： Grinding Motor: 3 KW Motor Speed: 2880 times/minute Grinding Wheel Diameter: φ200mm*35mm Grinding Range: φ90mm-200mm Control: PLC Click To See More Motorcycle Brake…
Brake Pads Back Plates Production Line is an automatic production machine for punch the brake pad back plates. Technical Specifications: Sliding Block Pressure: 1250KN Sliding Block Stroke:180mm Stoke Numbers:50 times/min (fixed);35-50 times/min (alterable) Die Height:350mm Die Height Adjustment:90mm Dimension From Slider Centreline to Machine:350mm Slider Base Size:620mm (L/R)*520mm(F/B) Shank Hole Size:70mm(diameter);90mm(depth) Work Table Size:1100mm (L/R)*680mm(F/B)…
Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…