No products were found matching your selection.
Other Related Products
-

Brake Pads Cleanning Machine Before Powder Coating is used to clean the back plate side of brake pads before powder coating, to guarantee a smooth coating performance. Technical Parameters Production Capacity: About 3000 pcs/hour Speed: 9 meters/minute Brush: 3 Pcs Brush Motor: 1.1kw*3 Transport Motor: 0.75kw Dust Collect: Seperately for single brush
-

Motorcycle Finished Brake Shoe Tunnel Type Oven is used to combined the brake shoe and friction linings by heating in the hot oven, Technical Parameters: Total Power: 90 KW Machine Size: 21000mm*1150mm*1300mm Heating Pipe: Stainless Heating Pipe Transfer Type: Mesh Conveyor Wind Motor: 0.37KW*5 Temperature: Automatic PLC Control Production Capacity: 3000 sets/8 hours Click To…
-

Brake Pads Friction Materials-Mineral Fiber|Mineral Wool Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus of…
-

Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters: – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy: 0.01mm…
-

Motorcycle Brake Shoe Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings Technical Parameters: Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide Block Speed: Fast Down (200mm/s); Slow Down(60mm/s); Slow…
-

Brake Pads Friction Wear Test Machine provides precise data on frictional material performance and wear characteristics in accordance with Chinese Standard GB5763-98; GB5764-98 and Japanese Standard JIS D4411-1993. Technical Parameters: – Friction plate:Material HT250; Hardness:HB180-220; – Rotating speed: 480 ± 10 r/min; – Driving motor: 7.5 kw, 970 r/min; – Sample Size: 25 x 25mm; Thickness: 5 – 7…
-

Brake Pads Shear Test Machine measures the force required to shear the friction lining from the backing plate to test its strength. It combines precise test control with ease of operation, generating accurate results, and it is an ideal instrument for research and development or quality control. This machine meets the standards of major brake…
-

CV Brake Pads Roller Gluing Machine for brake pad back plates, which includes three parts in this machine, which is widely used in brake pad factory, with a higher production efficiency, and good gluing performance. Technical Parameters: – ROLLER GLOWING MACHINE Adhesive Machine Infrared Heating Tunnel Fan Cooling Tunnel – ADHESIVE PART : Gluing Roller:…
-
