Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
Automatic Brake Pads Friction Mixes Weighing Machine is used to weigh the friction mixture and divide then into small cups according the set weight of input raw materials for brake pads. Material tank can be divided into two bins, and weigh two different mixture at the same time. Technical Parameters： BL-PC46–FMW(for pc brake pads) Working…
Motorcycle Brake Pads Disc Grinding Machine is to process the surface grinding of all kinds of brake pads, which doesn’t require fixtures to hold brake pads, brake pads are all fixed on the grinder disc by electromagnets. It can do fine grinding, coarse grinding and dust cleaning at the same time. It also equipped with step-less…
Brake Pads Friction Materials-Nitrile Butadiene Rubber(NBR) also known as Butadiene Acrylonitrile rubber, is a widely used friction material adhesive, with good cold resistance, abrasion resistance, oil resistance, and elasticity. Rubber powder works not only as the binder, but also as an inorganic filler in the friction materials. It can be evenly mixed with resin to…
Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
Car Brake Shoes Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and brake shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Pads Friction Material- Wollastonite is a widely used friction material reinforced fiber, which is gradually replace asbestos as a main reinforced fiber during the friction material production, such as Brake Linings, brake pads, and other brake system friction material. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Length of Fiber (lf): 0.384mm Diameter of Fiber (df): 20μm Length to Diameter Ratio…
CV Brake Lining Warning Sensor Cutting Grinder is a machien to process the warning sensor cuts on the CV Brake Linings with high working performance. Technical Parameters： Machine size:1350MM*1050MM*1750MM Production Capacity:5000-5500pcs / 8hours Processing Range: R180-R205 Width: 150-230mm Total Power: 2.2kw Machine Weight: 800kg
Motorcycle Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…