Motorcycle Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr: 2300pcs/hr,…
Motorcycle Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Car Brake Pads Slot and Chamfering Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880…
Brake Lining Resin Pulverizer Machine is designed for grinding the resin into production level granule size, raw material is fed into the grinding chamber via hopper by spiral feeder, cut into powder particles by high speed cutters, then moved into separator by wind generated by motor, this method is called negative pressure sucking method. No…
Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters： Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
Motorcycle Brake Pads Roller Gluing Machine for brake pad back plates, which includes three parts in this machine, which is widely used in brake pad factory, with a higher production efficiency, and good gluing performance. Technical Parameters： – ROLLER GLOWING MACHINE Adhesive Machine Infrared Heating Tunnel Fan Cooling Tunnel – ADHESIVE PART : Gluing Roller:…
Car Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
Brake Pads Friction Material- Wollastonite is a widely used friction material reinforced fiber, which is gradually replace asbestos as a main reinforced fiber during the friction material production, such as Brake Linings, brake pads, and other brake system friction material. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Length of Fiber (lf): 0.384mm Diameter of Fiber (df): 20μm Length to Diameter Ratio…
Brake Pads Friction Materials- Rock Wool Fiber Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus…