No products were found matching your selection.
Other Related Products
-
CV Brake Pad Back Plates Punch Machine is a punch machine for producing the CV brake pad back plates, can be connected with mechanical robots. Technical Specifications: Sliding Block Pressure: 5000KN Sliding Block Stroke:200mm Stoke Numbers:22 times/min (fixed) Die Height:500mm Die Height Adjustment:130mm Dimension From Slider Centreline to Machine:450mm Slider Base Size:820mm (L/R)*500mm(F/B) Shank Hole…
-
Motorcycle Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
-
CV Brake Linings Automatic Packing Line is used for packing finished Brake Pads, brake linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters: – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
-
Light Truck Brake Lining Warning Line Machine is used to work the warning lines on the light truck Brake Linings with longer length. Technical Parameters: Processing Range:R130 – R165 Product Height:40mm – 120mm Working Efficiency:2000-2300 pcs/8 hours Size:1200MM*1400MM*1600MM Machine Weight: 450kg Total Power:3kw
-
Motorcycle Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃~15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
-
Brake Linings Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…
-
Motorcycle Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters: – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled….
-
Brake Pad Back Plates Automatic Drilling Machine is an automatic drilling machine for the Brake Pads Back Plates with high production efficiency and drilling permance, it not only can increase your production capacity, but also can reduce your labor cost during production. Technical Specifications: Max Feeding Stroke: 700mm Max Pick Stroke: 700mm Max Drilling Deepth:…
-
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: Designing Concept: This automatic equipment is divided into 4 blocks: Block…