Car Brake Shoes Tensioning Machine is used for fixing the lining and brake shoe back plates. Technical Parameters： 1. Hoof working diameter range:170~340mm (customized according customer’s requirement) 2. Work pressure:1000kg/10000N 3. Size: 800*500*850mm 4. Weight: 500Kgs Click To See More Car Brake Shoes Machines
Brake Pads Back Plates Assembling Automatic Production Line is an full automatic production line for brake pads back plates with a complete production process. Technical Parameters： Punch Machine: 1100KN/1250KN/1600KN Main Robot Machine: Feeding Materials Punch Machine: Holes Punch Punch Machine: Pins Punch Punch Machine: Side Punch Hydraulic Press Machine:3250KN; Fine Blanking Robot Hands: Moving/Reversal Deburring Machine:Removing…
Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr: 2300pcs/hr,…
Automatic CV Brake Shoe Riveting Machine is designed for riveting the CV Brake Linings onto the steel CV brake shoe backs. It is a high degree of automation machine, with simple operation, only one ordinary operator can complete the work. Full digital control, full monitoring of riveting stroke and pressure, complete preservation of production data….
CV Brake Lining Combined Grinding Machine is a machine to pricess the inner arc, out arc and side chamfering of CV Brake Linings. Technical Parameters： CV Brake Lining Combined Grinding Machine Click To See More Brake Lining Machines
Motorcycle Finished Brake Shoe Side Grinder is used to grinding the both sides of finished Brake Shoes to clean the surface. Technical Parameters： Grinding Motor: 2 KW Motor Speed: 2880 times/minute Chain Motor:75 KW Machine Size: 1500mm*700mm*1200mm Click To See More Motorcycle Brake Shoes Machines
Motorcycle Brake Shoes Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
Motorcycle Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Introduction: Brake Pads Backing Plates Cleanning Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification Size:L8565mm*W2120*H1290mm Load and Lay Off Material Platform (Length/Width):Each With 500×440mm Cleaning Tank Size:L2300×W440×H200mm Spray Rinse Size:L800×W440×H150mm Compressed Air Cutting Water Inner Size:L600×W440×H150mm Hot Oven Size:L2998×W440×H150mm Conveyor Belt Width:400mm Liquid Storage Tank:L700*2 Voltage:220V±15`HZ;380V±15% 50HZ Ultrasonic…