Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
Car Brake Pads Laser Printing Machine is used for printing all kinds of logo and words on the surface of finished brake pads, pc brake shoe linings, cv Brake Linings, anti-noise shims as well as backing plates. It’s clean, safe and fast, and can be connected into the automatic production line with other machines. Technical…
Brake Pads Friction Materials-Flake Graphite/Natural Graphite Powder is probably the most familiar of the natural graphite materials. Most people are familiar with the finely powdered graphite used as a lubricant, or the “lead” in pencils. Both of these products typically contain flake graphite. As the name implies flake graphite has a distinctly flaky or platy…
Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy: 0.01mm…
Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive motor…
Car Brake Pads Krauss Test Machine is designed to test the wear performance of brake friction materials for automotive disc brake pads / drum Brake Shoes and assembly, in accordance with world recognized standard PVW-3211, PVW-3212, ECE R90. Machine is with constant torque test function and constant pressure test function Technical Parameters： Supply Power: 380V,…
Car Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
Car Brake Pads Shear Test Machine measures the force required to shear the friction lining from the backing plate to test its strength. It combines precise test control with ease of operation, generating accurate results, and it is an ideal instrument for research and development or quality control. This machine meets the standards of major…
Motorcycle Brake Shoe Die Casting Machine is used for making brake shoe Iron automatic by Die Casting Technology, this system consists of five parts: 1. Die casting system; 2. Semi-closed control cabinet; 3. Injection curve display; 4. Automatic Injection machine; 5. Upright spraying machine Specification: Clamping Part 1. Clamping: 1600 KN 2. Stroke: 380 mm 3. Capacity modulus(Min. – Max.): 200 – 550 mm…