No products were found matching your selection.

Other Related Products

  • Motorcycle Brake Shoes Friction Materials Mixer Machine

    Motorcycle Brake Shoes Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…

  • Brake Pads Brake-in Strips Roller Gluing Machine

    This machine is designed to coat the brake-in strips on the friction surface. The pattern of the strips is depending by the roller width of the gluing head, it shall be determined when manufacturing the machines. Coating Head:-The curing time:80-150 ℃, 4-8 minutes.-Gluing Roller: 1 pcs-Adhesive Speed: 0-5 m/min-Production Capacity: 1000 pcs/hour-Adhesive Machine Size: 1500mm…

  • Car Brake Pads Friction Materials Mix Machine

    Car Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…

  • Car Brake Shoes Steel Shot Blasting Machine

    Car Brake Shoes Steel Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…

  • Brake Linings Compressed Air Machine

    Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃~15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…

  • Car Brake Pads Combined Grinding Machine

    Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters:  Grinding Unit Spec.  Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…

  • Brake Pads Friction Material Brass Fiber

    Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…

  • Brake Pads Friction Materials Titanates-Potassium Magnesium

    Brake Pads Friction Materials Titanates-Potassium Magnesium are widely used in the production of automotive ceramic brake pads, train Brake Shoes and clutch friction plates. GRANULARITY(SIEVE ANALYSIS,PARTICLE SIZE) Diameter(μm):2-10μm D97(µm):18-25μm APPEARANCE Shape:  Flaky Particles Color:  Ivory Yellowish White PHYSICAL PROPERTIES Specific gravity(g/cm3): 3.7±0.1 Bulk Density(g/cm3):0.6-1.1 Moisture Rate(%): ≤1.5% Melting point (℃): >1300℃ Hardness(Mohs): 4.0 PH 8.0-11.0 CHEMICAL COMPOSITION Composition  TiO2 MgO K2O Others Rate(%w.t.)…

  • Motorcycle Brake Pads Compressed Air Machine

    Motorcycle Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃~15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…