Car Brake Pads Chase Test Machine is designed and engineered to uate the frictional characteristics of materials used in braking systems in accordance with world recognized standard J661, ISO 7881, GB/T 17469-98 test procedure. The machine may be effectively utilized for quality control, research and development, or certification type applications, with highly repeatable results. Technical…
This machine is designed to coat the brake-in strips on the friction surface. The pattern of the strips is depending by the roller width of the gluing head, it shall be determined when manufacturing the machines. Coating Head:-The curing time:80-150 ℃, 4-8 minutes.-Gluing Roller: 1 pcs-Adhesive Speed: 0-5 m/min-Production Capacity: 1000 pcs/hour-Adhesive Machine Size: 1500mm…
CV Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…
Brake Linings Hot Curing Oven is used for Brake Pads, brake linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the temperature…
Vertical Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
BL-EHP series positive molding technique vulcanizing press machines are the most popular type press machines used for making both OE passenger car and commercial vehicle Brake Pads. There 8 cylinder type and 4 cylinder type, designed according to different size of brake pads, and required curing pressure for formulation. All the press machine can be…
CV Brake Lining Side Chamferring Machine is used for processing both edge chamferring and grinding of CV Brake Linings on one side. Technical Parameters： Machine size:2380 x 1000 x 1100 mm Production Capacity:2800 – 3500 pcs / shift Chamferring size: Max. 50 mm. Click To See More Brake Lining Machines
CV Brake Lining Inner Arc Grinding Machine is used for grinding the inner surface of CV brake shoe lining. Technical Parameters： 1. Size: 3800 x 960 x 1350mm 2. Weight: 2450kg 3. Production Capacity: 2500-3200pcs (8 hours) 4. Max Chamferring Height: 30 degree*20 mm 5. Semi-diameter adjustable range: (R140 – R170) – (R170 – R215) 6. Main Motor Power: 7.5kw 7. Chamfer Motor Power: 2.2kw 8. Conveyor: 1.5kw Click To See More Brake…
Brake Pads Backing Plates Deburring Machine is used to clean the burrs on sides of Brake Pads Back Plates after the punching process. Technical Parameters： Size of the machine(L x W x H): 1900mm x 800mm x 1050mm Size of backing plate: Max. 30mm x 350mm Production capacity: 16000 pcs/ hour Working Table: Speed: 0-…