No products were found matching your selection.
Other Related Products
-

The Automatic Brake Pads Friction Mixes Weighing Machine is an advanced and highly efficient device specifically designed for the brake pads manufacturing industry. Its primary function is to accurately weigh the friction mixture and then divide it into small cups in strict accordance with the set weight of the input raw materials for brake pads….
-

Brake Pads Friction Materials-Flake Graphite/Natural Graphite Powder is probably the most familiar of the natural graphite materials. Most people are familiar with the finely powdered graphite used as a lubricant, or the “lead” in pencils. Both of these products typically contain flake graphite. As the name implies flake graphite has a distinctly flaky or platy…
-

Car Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system,…
-

-

Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
-

Brake Pads Friction Materials- Synthetic Graphite|Artificial Graphite can be used as basic raw material for brake pads producing and manufacturing. It has the characteristics of elasticity, reduced resistance and lubricity, environmental friendliness, absorbability to liquid adhesives, fusion with water, oil and adhesives. GRANULARITY(SIEVE ANALYSIS,PARTICLE SIZE) Particle Size: 0-1.0mm/0-0.2mm/0.15-1.0mm/customized PHYSICAL PROPERTIES Specific Gravity(g/cm3) 2.21 Apparent Density(g/cm3) 1.19 Moisture…
-

Automatic CV Brake Shoe Lining Grinding Line is an assembled production for CV Brake Linings, including arc grinding, holes driling, cleaning. Technical Parameters: CV Brake Lining Combined Grinder vCV Brake Lining CNC Hole Drilling Machine (2-drum working station) CV Brake Lining Out Arc Grinder (PLC Controlled)
-

-

Introduction: Brake Pads Backing Plates Cleanning Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification Size:L8565mm*W2120*H1290mm Load and Lay Off Material Platform (Length/Width):Each With 500×440mm Cleaning Tank Size:L2300×W440×H200mm Spray Rinse Size:L800×W440×H150mm Compressed Air Cutting Water Inner Size:L600×W440×H150mm Hot Oven Size:L2998×W440×H150mm Conveyor Belt Width:400mm Liquid Storage Tank:L700*2 Voltage:220V±15`HZ;380V±15% 50HZ Ultrasonic…