Car Brake Shoe Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings, and it is highly working conditions and efficiency. Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide…
CV Brake Lining Warning Line Grinder is a machine to process the warning lines on CV Brake Linings. Technical Parameters： Processing Range:R180 – R205 Product Height:150mm – 230mm Working Efficiency:10000pcs/8 hours Size:1300mm*1400mm*1400mm Machine Weight: 450kg Total Power:6kw
Motorcycle Brake Shoe&Brake Lining Gluing Machine is to spray the glue on both the brake shoe aluminum parts and the friction brake lining. Technical Parameters： Total Power: 30 KW Machine Size: 9000mm*1400mm*1000mm Heating Pipe: Infrared Transfer Type: Mesh Conveyor Wind Motor: 0.75KW*3 Temperature: Automatic PLC Control Glue Tank: 40 L Production Capacity: 30000-40000 Pcs/8 hours…
Automatic PC Brake Shoe Lining Grinding Line for processing the passenger car brake shoe lining inner arc grinding, outer arc grinding and side edge chamferring, and can add long lining cutting procedure accordingly (if brake shoe lining pressed into a long block). The production line adopts PLC programmable control system, and the action and process…
CV Brake Pads Strips Gluing Machine is designed to coat the brake-in strips on the friction surface. Coating different pattern of the glue strips shall change the pattern molds on this machine. Technical Parameters： Size of the machine(L x W x H): 650mm x 800mm x 1600mm Working Table Size(L x W): 280mm x 350mm…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: Designing Concept： This automatic equipment is divided into 5 blocks: Block…
Brake Pad Back Plate Assembled Punch Machine is an automatic puch machine for the process of blanking, holes punch, side punch, pins punch and fine blanking. Technical Specifications: No. Item Parameters 1 Master Cylinder Force 5000 KN 2 Mold Cylinder Force 1000 KN*2 3 Max Working Force 25 Mpa 4 Main Cylinder Max. Stroke 300…
Motorcycle Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled….
Car Brake Pads Slot and Chamfering Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880…