Motorcycle Brake Shoe&Brake Lining Gluing Machine is to spray the glue on both the brake shoe aluminum parts and the friction brake lining. Technical Parameters： Total Power: 30 KW Machine Size: 9000mm*1400mm*1000mm Heating Pipe: Infrared Transfer Type: Mesh Conveyor Wind Motor: 0.75KW*3 Temperature: Automatic PLC Control Glue Tank: 40 L Production Capacity: 30000-40000 Pcs/8 hours…
Car Brake Pad Back Plates Production Machine is a production machine for car Brake Pads Back Plates, with automatic feeding and moving robots. Technical Specifications: Sliding Block Pressure: 800KN Sliding Block Stroke:160mm Stoke Numbers:60 times/min (fixed);40-60 times/min (alterable) Die Height:320mm Die Height Adjustment:80mm Dimension From Slider Centreline to Machine:310mm Slider Base Size:540mm (L/R)*460mm(F/B) Shank Hole…
Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
Brake Lining Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Lining Machines
Car Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system,…
Car Brake Shoe Lining Inner Arc Grinding Machine for the internal radius of brake cutting linings, which can process an accurate size and qualified surface on the inner surface of cutting linings, to provide a good combination performance of the Brake Linings. Technical Parameters： Linings Process Range: Diameter＞60mm Feeding Speed: 1.7m/minute Main Axle Power: 3KW/2880…
Brake Shoes Steel Plates Punching Machine is used for punching tendon plate for Commercial Vehicles brake shoe.. Specification: 1. Nominal force：630 T 2. Valid square of working table：L-R:1600mm,F-B: 1600mm 3. Main Motor:44Kw 4. Weigh: 33T Click To See More Brake Shoes Machines
CV Brake Linings Automatic Packing Line is used for packing finished Brake Pads, brake linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
Brake Linings Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…