Car Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system,…
Motorcycle Brake Shoe&Brake Lining Gluing Machine is to spray the glue on both the brake shoe aluminum parts and the friction brake lining. Technical Parameters： Total Power: 30 KW Machine Size: 9000mm*1400mm*1000mm Heating Pipe: Infrared Transfer Type: Mesh Conveyor Wind Motor: 0.75KW*3 Temperature: Automatic PLC Control Glue Tank: 40 L Production Capacity: 30000-40000 Pcs/8 hours…
Brake Pads Friction Materials Titanates-Potassium Magnesium are widely used in the production of automotive ceramic brake pads, train Brake Shoes and clutch friction plates. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Diameter(μm)：2-10μm D97(µm)：18-25μm APPEARANCE Shape： Flaky Particles Color： Ivory Yellowish White PHYSICAL PROPERTIES Specific gravity(g/cm3): 3.7±0.1 Bulk Density(g/cm3):0.6-1.1 Moisture Rate(%): ≤1.5% Melting point (℃): >1300℃ Hardness(Mohs): 4.0 PH 8.0-11.0 CHEMICAL COMPOSITION Composition TiO2 MgO K2O Others Rate（%w.t.）…
Motorcycle Brake Shoes Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
Brake Lining Holes Drilling and Warning Indicator Cuts Machines is used to process the holes and warnning cuts on different sizes of Brake Linings. Processing Range: R180mm-R205mm Width Range: 150mm-230mm Holes Shape: Adjustable Motor: 7 KW Feeding: Manual or Automatic Production Capacity: 1300pcs-1800pcs/8 hours Dust Collector: φ114mm*1pcs;φ50mm*2pcs Machine Size: 1350mm*1250mm*1900mm Machine Weight: 1300KGS Click To…
Brake Pads Electrostatic Powder Coating Line applies Infrared Heating Technology, which is 30-50% energy saving compared to electric heating technology with same electric power, the ordinary electric heating tunnel applies heat conduction to transfer the heat energy to brake pads, however, the infrared heating tunnel applies thermal radiation by special short and medium infrared waves…
Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy: 0.01mm…
Car Brake Shoes Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Car Brake Shoes Machines
Car Brake Pads Krauss Test Machine is designed to test the wear performance of brake friction materials for automotive disc brake pads / drum Brake Shoes and assembly, in accordance with world recognized standard PVW-3211, PVW-3212, ECE R90. Machine is with constant torque test function and constant pressure test function Technical Parameters： Supply Power: 380V,…