Motorcycle Brake Pads Disc Grinding Machine is to process the surface grinding of all kinds of brake pads, which doesn’t require fixtures to hold brake pads, brake pads are all fixed on the grinder disc by electromagnets. It can do fine grinding, coarse grinding and dust cleaning at the same time. It also equipped with step-less…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…
Car Brake Shoe Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings, and it is highly working conditions and efficiency. Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide…
CV Brake Lining Laser Printing Machine is used for printing all kinds of logo and words on the surface of finished Brake Pads, pc brake shoe linings, cv Brake Linings, anti-noise shims as well as backing plates. It’s clean, safe and fast, and can be connected into the automatic production line with other machines. Technical…
Motorcycle Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled….
The CV Brake Lining CNC Out Arc Grinder, an integral component of Brake Linings Grinder Equipments, Brake Linings Grinder Machinery, and Brake Linings Machinery, represents a pinnacle of contemporary engineering. This cutting – edge apparatus revolutionizes the production of commercial vehicle brake linings by meticulously grinding the out – arc surface of CV Brake Linings…
Brake Lining Resin Pulverizer Machine is designed for grinding the resin into production level granule size, raw material is fed into the grinding chamber via hopper by spiral feeder, cut into powder particles by high speed cutters, then moved into separator by wind generated by motor, this method is called negative pressure sucking method. No…
Brake Pad Backing Plates Glue Spraying Booth is assembled from several units including painting room, painting system, spray gun transmission device, tray transmission system, exhaust gas treatment system, etc. Main Configuration and Technical Parameters: Painting room size: 2600×1840×1910mm Chain center distance: 650mm Operating height: 800±50mm Glue supply method: Pneumatic agitator prevents glue from settling, peristaltic…
CV Brake Pad Back Plates Punch Machine is a punch machine for producing the CV brake pad back plates, can be connected with mechanical robots. Technical Specifications: Sliding Block Pressure: 5000KN Sliding Block Stroke:200mm Stoke Numbers:22 times/min (fixed) Die Height:500mm Die Height Adjustment:130mm Dimension From Slider Centreline to Machine:450mm Slider Base Size:820mm (L/R)*500mm(F/B) Shank Hole…