CV Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…
Car Brake Shoes Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Car Brake Shoes Machines
Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy: 0.01mm…
Automatic Brake Pads Friction Mixes Weighing Machine is used to weigh the friction mixture and divide then into small cups according the set weight of input raw materials for brake pads. Material tank can be divided into two bins, and weigh two different mixture at the same time. Technical Parameters： BL-PC46–FMW(for pc brake pads) Working…
Motorcycle Brake Pads Slot Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880 rev /…
Car Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive…
Motorcycle Brake Lining Cutting Machine is a special equipment to cut brake shoe linings into small pieces to meet different dimension requirements. Specification： 1. Blade Diameter 150mm 2. Total: 13 blades 3. Diameter: R85-120mm 4. Motor power: 4KW 5. Adjustable lining cutting width Click To See More Motorcycle Brake Shoes Machines
CV Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Car Brake Pads Friction Wear Test Machine provides precise data on frictional material performance and wear characteristics in accordance with Chinese Standard GB5763－98; GB5764－98 and Japanese Standard JIS D4411-1993. Technical Parameters： – Friction plate：Material HT250; Hardness：HB180－220； – Rotating speed: 480 ± 10 r/min; – Driving motor: 7.5 kw, 970 r/min; – Sample Size: 25 x 25mm; Thickness: 5 –…