Brake Pads Friction Material- Wollastonite is a widely used friction material reinforced fiber, which is gradually replace asbestos as a main reinforced fiber during the friction material production, such as Brake Linings, brake pads, and other brake system friction material. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Length of Fiber (lf): 0.384mm Diameter of Fiber (df): 20μm Length to Diameter Ratio…
Brake Pads Disc Grinding Machine is to process the surface grinding of all kinds of brake pads, which doesn’t require fixtures to hold brake pads, brake pads are all fixed on the grinder disc by electromagnets. It can do fine grinding, coarse grinding and dust cleaning at the same time. It also equipped with step-less speed…
Automatic Motorcycle Brake Shoe Casting Machine is an group of machines for motorcycle brake shoe die casting production, with high automation and formance. Technical Parameters: Hydraulic Working Pressure:14 MPa Clamping Force:2000 KN Space Between Tie Bars:480*480mm Tie Bar Diameter:Φ85mm Die Opening Stroke:380mm Injection Force(intensify) :270 KN Plunger launch distance:135mm Injection position:0-140mm Plunger Diameter:￠50—-￠70 mm Injection…
Brake Pad Steel Back Plates Machine 4000KN is a punch machine for blanking process of Brake Pads Backing Plates, with stable working performances! Technical Specifications: Sliding Block Pressure: 4000KN Sliding Block Stroke:200mm Stoke Numbers:25 times/min Die Height: 600mm Die Height Adjustment:120mm Dimension From Slider Centreline to Machine:1050mm Slider Base Size:1050mm (L/R)*1050mm(F/B) Shank Hole Size:80mm(diameter);90mm(depth) Work…
Motorcycle Brake Shoe&Brake Lining Gluing Machine is to spray the glue on both the brake shoe aluminum parts and the friction brake lining. Technical Parameters： Total Power: 30 KW Machine Size: 9000mm*1400mm*1000mm Heating Pipe: Infrared Transfer Type: Mesh Conveyor Wind Motor: 0.75KW*3 Temperature: Automatic PLC Control Glue Tank: 40 L Production Capacity: 30000-40000 Pcs/8 hours…
Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters： Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
Introduction: With the improvement of product quality, customers’ demand for OE quality Brake Pads has become increasingly strong, and accurate weighing system has become a rigid need. Therefore, we launched this weighing system to match the independent press system with different molds types. Not only increase the production efficiency, but it also greatly reduces the operating intensity…
Car Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Pad Machines
Motorcycle Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…