No products were found matching your selection.
Other Related Products
-

-

-

Brake Pads Friction Materials- Synthetic Graphite|Artificial Graphite can be used as basic raw material for brake pads producing and manufacturing. It has the characteristics of elasticity, reduced resistance and lubricity, environmental friendliness, absorbability to liquid adhesives, fusion with water, oil and adhesives. GRANULARITY(SIEVE ANALYSIS,PARTICLE SIZE) Particle Size: 0-1.0mm/0-0.2mm/0.15-1.0mm/customized PHYSICAL PROPERTIES Specific Gravity(g/cm3) 2.21 Apparent Density(g/cm3) 1.19 Moisture…
-

Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
-

Car Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃~15℃ Higher Than The Environment Temperature – Lubricating Oil…
-

Brake Pads Friction Materials- Rock Wool Fiber Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus…
-

Brake Pads Plough-Chopper Friction Materials Mixer applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…
-

Motorcycle Brake Shoe Linings Combined Grinding Machine is used for process the inner arc, out arc, side chamfering and cutting of brake shoe linings Technical Parameters: Out Arc Grinding Motor: 5 KW Inner Arc Grinding Motor: 5 KW Chamfering Motor: 2 KW Cutting Motor: 3 KW Machine Size: 4400mm*1200mm*1500mm Working Capacity: 30000 pcs/8 hours Click…
-
