No products were found matching your selection.
Other Related Products
-
Motorcycle Brake Shoes Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
-
Brake Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide Block Speed: Fast Down (200mm/s); Slow Down(60mm/s); Slow Close Mould…
-
Brake Pads Plough-Chopper Friction Materials Mixer applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…
-
CV Brake Linings Hot Curing Oven is used for Brake Pads, brake linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
-
Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Pad Machines
-
Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr: 2300pcs/hr,…
-
CV Brake Shoes Steel Punching Machine is used for blanking rolling plate,punching holes for rolling plate and tendon plate for Commercial Vehicles Brake Shoe. Specification: 1. Nominal force：400 T 2. Table size：L-R:1250mm,F-B:1250mm 3. Outline:3500mm 4. Dimension:6000mm 5. Main Motor:22Kw Click To See More Brake Shoes Machines
-
Car Brake Shoes Steel Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
-
Car Brake Shoes Lining Cutting Machine is a special equipment to cut brake shoe linings into small pieces to meet different dimension requirements. Specification： 1. Blade Diameter 150mm 2. Total: 13 blades 3. Diameter: R85-120mm 4. Motor power: 4KW 5. Adjustable lining cutting width Click To See More Car Brake Shoes Machines
