Brake Pad Back Plates Production Machine is a punch machine for produce brake pad back plates with higher prdocution efficiency and stable working. Technical Specifications: Sliding Block Pressure: 1100KN Sliding Block Stroke:180mm Stoke Numbers:50 times/min (fixed);35-50 times/min (alterable) Die Height:350mm Die Height Adjustment:90mm Dimension From Slider Centreline to Machine:350mm Slider Base Size:620mm (L/R)*520mm(F/B) Shank Hole…
Motorcycle Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled….
Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Pads Backing Plates Ultrasonic Clean Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification: – Size:L8565*W2120*H1290mm – Load and Lay Off Material Platform (Length/Width):Each With 500×440mm – Cleaning Tank Inner Size:L2300×W440×H200mm – Spray Rinse Inner Size:L800×W440×H150mm – Compressed Air Cutting Water Inner Size:L600×W440×H150mm – Hot Oven Inner Size:L2998×W440×H150mm – Conveyor Belt Width:400mm – Liquid Storage Tank:L700*2…
CV Brake Shoes Steel Punching Machine is used for blanking rolling plate,punching holes for rolling plate and tendon plate for Commercial Vehicles Brake Shoe. Specification: 1. Nominal force：400 T 2. Table size：L-R:1250mm,F-B:1250mm 3. Outline:3500mm 4. Dimension:6000mm 5. Main Motor:22Kw Click To See More Brake Shoes Machines
Brake Pads Friction Materials-Mineral Fiber|Mineral Wool Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus of…
Car Brake Pads Riveting Machine is used for riveting some kits on the finished brake pads, such as wear indicator plate, retaining clips after code printing before package. Technical Parameters： Work Pressure: 5-10MPa Effective Travel:100mm Height:210mm Riveting Span:220mm Power: 1.1KW/380V Dimension: 640×520×1030 mm Weight: 140Kg Click To See More Brake Pad Machines
PRODUCTION DESCRIPTION： Brake Pads Friction Material-Fiber Steel Wool is a friction raw material filler, can be used in all kinds of friction materials. It can provide the friction products excellent stable performance over a wide temperature range, with low wear rate and good heat dissipation. Chopped steel fiber is made from high quality low carbon…
Brake Pads Back Plates Gluing Painting Room is assembled from several units including painting room, painting system, spray gun transmission device, tray transmission system, exhaust gas treatment system, etc. Configuration and Technical Parameters: Painting room size: 1900×2860×2130mm Chain center distance: 650mm Operating height: 800±50mm Painting System: Spray gun: Japan Iwata spray gun WA200-1.2 caliber Working…