Automatic Brake Pads Friction Mixes Weighing Machine is used to weigh the friction mixture and divide then into small cups according the set weight of input raw materials for brake pads. Material tank can be divided into two bins, and weigh two different mixture at the same time.
Car Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system,…
The CV Brake Lining Inner Arc & Chamfering Combined Grinder, also known as a Brake Linings Chamfer Machine, Brake Linings Grinder Machine, and a vital component of Brake Linings Machinery, is a highly specialized and sophisticated piece of equipment. It is meticulously designed to execute precise operations on the inner arc surface and chamferings of…
PRODUCTION DESCRIPTION： Brake Pads Friction Material-Fiber Steel Wool is a friction raw material filler, can be used in all kinds of friction materials. It can provide the friction products excellent stable performance over a wide temperature range, with low wear rate and good heat dissipation. Chopped steel fiber is made from high quality low carbon…
CV Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
This machine is designed to coat the brake-in strips on the friction surface. The pattern of the strips is depending by the roller width of the gluing head, it shall be determined when manufacturing the machines. Coating Head:-The curing time:80-150 ℃, 4-8 minutes.-Gluing Roller: 1 pcs-Adhesive Speed: 0-5 m/min-Production Capacity: 1000 pcs/hour-Adhesive Machine Size: 1500mm…
Car Brake Shoes Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and brake shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Motorcycle Brake Shoe Die Casting Machine is used for making brake shoe Iron automatic by Die Casting Technology, this system consists of five parts: 1. Die casting system; 2. Semi-closed control cabinet; 3. Injection curve display; 4. Automatic Injection machine; 5. Upright spraying machine Specification: Clamping Part 1. Clamping: 1600 KN 2. Stroke: 380 mm 3. Capacity modulus(Min. – Max.): 200 – 550 mm…
CV Brake Pads Cleanning Machine Before Powder Coating is used to clean the back plate side of brake pads before powder coating, to guarantee a smooth coating performance. Technical Parameters Production Capacity: About 3000 pcs/hour Speed: 9 meters/minute Brush: 3 Pcs Brush Motor: 1.1kw*3 Transport Motor: 0.75kw Dust Collect: Seperately for single brush