No products were found matching your selection.
Other Related Products
-

Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive motor…
-

CV Brake Linings Automatic Packing Line is used for packing finished Brake Pads, brake linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters: – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
-

PRODUCTION DESCRIPTION: Brake Pads Friction Materials-Chopped Graphite Paper is made of chemically treated high-carbon flake graphite, which is expanded at high temperature and pressed into rolls. It is the basic material for manufacturing various graphite sealing products. It is widely used in sealing of machines, pipes, pumps and valves in electric power, petroleum, chemical industry,…
-

-

Brake Lining Side Chamferring Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters: Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines
-

Car Brake Pad Scorching Machine is used for friction surface high temperature scorching treatment, to carbonize the surface of OE quality Brake Pads. It consists with scorch oven and cooling zone with one line. It is continuous operation type and no delaying time. Brake pad moves on electrical heated plate without pressure. Scorching time and…
-

Motorcycle Brake Shoes Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and brake shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
-

Brake Pad Steel Back Plates Machine 4000KN is a punch machine for blanking process of Brake Pads Backing Plates, with stable working performances! Technical Specifications: Sliding Block Pressure: 4000KN Sliding Block Stroke:200mm Stoke Numbers:25 times/min Die Height: 600mm Die Height Adjustment:120mm Dimension From Slider Centreline to Machine:1050mm Slider Base Size:1050mm (L/R)*1050mm(F/B) Shank Hole Size:80mm(diameter);90mm(depth) Work…
-

Brake Linings Hot Curing Oven is used for Brake Pads, brake linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the temperature…