Brake Lining Automatic Weighting and Packing Machine is an automatic weighting and packing machine for Brake Linings friction materials, which can be directly load into the hot press machines to save the production time and labor cost in production. Technical Parameters： Power: 380V 50HZ Input Power: 4 KW Working Temperature: 5℃-40℃ Working Air Pressure: 4.6…
PRODUCTION DESCRIPTION： Brake Pads Friction Material-Fiber Steel Wool is a friction raw material filler, can be used in all kinds of friction materials. It can provide the friction products excellent stable performance over a wide temperature range, with low wear rate and good heat dissipation. Chopped steel fiber is made from high quality low carbon…
Motorcycle Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
CV Brake Pads Brake-In Strips Gluing Machine is designed to coat the brake-in strips on the friction surface. Coating different pattern of the glue strips shall change the pattern molds on this machine. Technical Parameters： Size of the machine(L x W x H): 650mm x 800mm x 1600mm Working Table Size(L x W): 280mm x…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…
Car Brake Shoe Lining Inner Arc Grinding Machine for the internal radius of brake cutting linings, which can process an accurate size and qualified surface on the inner surface of cutting linings, to provide a good combination performance of the Brake Linings. Technical Parameters： Linings Process Range: Diameter＞60mm Feeding Speed: 1.7m/minute Main Axle Power: 3KW/2880…
Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
Brake Pads Friction Materials- Synthetic Graphite|Artificial Graphite can be used as basic raw material for brake pads producing and manufacturing. It has the characteristics of elasticity, reduced resistance and lubricity, environmental friendliness, absorbability to liquid adhesives, fusion with water, oil and adhesives. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Particle Size: 0-1.0mm/0-0.2mm/0.15-1.0mm/customized PHYSICAL PROPERTIES Specific Gravity（g/cm3） 2.21 Apparent Density（g/cm3） 1.19 Moisture…