No products were found matching your selection.
Other Related Products
-

Brake Pads Plough-Chopper Friction Materials Mixer applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…
-

Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters: Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
-

Brake Pads Sand Blasting Machine is used for cleaning the out surface of a finished brake pad by silicon sands to present a clean and smooth appearance before powder coating, which is equipped with an Air Compressor to blow out silicon sands. Technical Parameters: – Working Room Size: Width ≤500mm – Application Range: Metal or Nonmetal…
-

Car Brake Pad Back Plates Production Machine is a production machine for car Brake Pads Back Plates, with automatic feeding and moving robots. Technical Specifications: Sliding Block Pressure: 800KN Sliding Block Stroke:160mm Stoke Numbers:60 times/min (fixed);40-60 times/min (alterable) Die Height:320mm Die Height Adjustment:80mm Dimension From Slider Centreline to Machine:310mm Slider Base Size:540mm (L/R)*460mm(F/B) Shank Hole…
-

-

Car Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system,…
-

CV Brake Linings Automatic Packing Line is used for packing finished Brake Pads, brake linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters: – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
-

Brake Lining Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters: – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Lining Machines
-
