Car Brake Pads Disc Grinding Machine is to process the surface grinding of all kinds of brake pads, which doesn’t require fixtures to hold brake pads, brake pads are all fixed on the grinder disc by electromagnets. It can do fine grinding, coarse grinding and dust cleaning at the same time. It also equipped with step-less…
CV Brake Lining Hot Press Machine is an automatic press machine combined with the automatic materials weighting and feeding machine, and an automatic pick-up robot. It not only can increase the working efficient, and also save the labor cost in production. lTechnical Parameters： Click To See More Brake Lining Machines
Car Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Car Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
Car Brake Pads Sand Blasting Machine is used for cleaning the out surface of a finished brake pad by silicon sands to present a clean and smooth appearance before powder coating, which is equipped with an Air Compressor to blow out silicon sands. Technical Parameters： – Working Room Size: Width ≤500mm – Application Range: Metal or…
Motorcycle Brake Shoe&Brake Lining Gluing Machine is to spray the glue on both the brake shoe aluminum parts and the friction brake lining. Technical Parameters： Total Power: 30 KW Machine Size: 9000mm*1400mm*1000mm Heating Pipe: Infrared Transfer Type: Mesh Conveyor Wind Motor: 0.75KW*3 Temperature: Automatic PLC Control Glue Tank: 40 L Production Capacity: 30000-40000 Pcs/8 hours…
Brake Lining Resin Pulverizer Machine is designed for grinding the resin into production level granule size, raw material is fed into the grinding chamber via hopper by spiral feeder, cut into powder particles by high speed cutters, then moved into separator by wind generated by motor, this method is called negative pressure sucking method. No…
Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
CV Brake Pads Cleanning Machine Before Powder Coating is used to clean the back plate side of brake pads before powder coating, to guarantee a smooth coating performance. Technical Parameters Production Capacity: About 3000 pcs/hour Speed: 9 meters/minute Brush: 3 Pcs Brush Motor: 1.1kw*3 Transport Motor: 0.75kw Dust Collect: Seperately for single brush