CV Brake Lining CNC Hole Drilling Machine (vertical type) is use to drill the holes on the CV Brake Linings by CNC automatic control system. Technical Parameters： Processing Range: R180mm-R205mm Width Range: 150mm-230mm Holes Shape: Adjustable Motor: 7 KW Feeding: Manual or Automatic Production Capacity: 2000pcs-2500pcs/8 hours Dust Collector: φ114mm*1pcs;φ50mm*2pcs Machine Size: 1350mm*1250mm*1900mm Machine Weight:…
Brake Pad Back Plates Flatting Machine is a hydraulic press machine to flatting the Brake Pads Back Plates, to ensure a qualified flatness. Technical Specifications: Height to the Opening Hole: 550mm Assembly Size: 600mm(left to right)x600mm(front to rear) Working Length: 350mm Motor/pump: 4KW (6 electrodes), 25L Height of the Working Table: 800mm Down-link Speed: 350mm/s…
Car Brake Shoes Steel Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
Combined Brake Shoes Lining Grinding Machine applies overlap-type frame, it can realize automatic load in and load out. it can process sides chamfering, inner arc grinding, and dust brushing. It solves the problems of weak synchronization of old technology grinder. It’s convenient to adjust the grinding motor, and easy to adjust the “R” size accuracy. The newly position…
Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled. –…
Car Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy:…
CV Brake Shoes Linings Automatic Packing Line is used for packing finished Brake Pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…