Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Pad Machines
Car Brake Pad Back Plates Production Machine is a production machine for car Brake Pads Back Plates, with automatic feeding and moving robots. Technical Specifications: Sliding Block Pressure: 800KN Sliding Block Stroke:160mm Stoke Numbers:60 times/min (fixed);40-60 times/min (alterable) Die Height:320mm Die Height Adjustment:80mm Dimension From Slider Centreline to Machine:310mm Slider Base Size:540mm (L/R)*460mm(F/B) Shank Hole…
Motorcycle Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr: 2300pcs/hr,…
CV Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters： Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
PRODUCTION DESCRIPTION： Brake Pads Friction Material-Fiber Steel Wool is a friction raw material filler, can be used in all kinds of friction materials. It can provide the friction products excellent stable performance over a wide temperature range, with low wear rate and good heat dissipation. Chopped steel fiber is made from high quality low carbon…
Car Brake Shoe Lining Cutting Machine is used to cutting the Brake Linings into pieces according to parts sizes. Technical Parameters： Electric Power: 380V 50HZ Production Capacity: 15 Cycles/Minute, Speed Adjustable. Cutting Knifes: Diamond Cutting Knifes Fixtures: 45# Steel Electric Motor: Cutting Axle 5.5KW, Mold Axle 0.55KW. Processing Accuracy: -Cutting Width:≤0.10mm -Parallelism Between Cutting Axle…
The CV Brake Lining Inner Arc & Chamfering Combined Grinder, also known as a Brake Linings Chamfer Machine, Brake Linings Grinder Machine, and a vital component of Brake Linings Machinery, is a highly specialized and sophisticated piece of equipment. It is meticulously designed to execute precise operations on the inner arc surface and chamferings of…
Brake Pads Backing Plates Gluing Machine adopts glue spraying room, conveyor, touch screen control, pneumatic system. The steel backing plates are put on the customized spray adhesive tablets by workers, automatically sent to spray adhesive by conveyor, automatically put in the spray adhesive and then into the connected oven to dry and cool. Spray Adhesive…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…