Motorcycle Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates…
Motorcycle Brake Shoes Tensioning Machine is used for fixing the lining and brake shoe back plates. Technical Parameters： 1. Hoof working diameter range:170~340mm (customized according customer’s requirement) 2. Work pressure:1000kg/10000N 3. Size: 800*500*850mm 4. Weight: 500Kgs Click To See More Motorcycle Brake Shoes Machines
Brake Pad Back Plates Flatting Machine is a hydraulic press machine to flatting the Brake Pads Back Plates, to ensure a qualified flatness. Technical Specifications: Height to the Opening Hole: 550mm Assembly Size: 600mm(left to right)x600mm(front to rear) Working Length: 350mm Motor/pump: 4KW (6 electrodes), 25L Height of the Working Table: 800mm Down-link Speed: 350mm/s…
Car Brake Shoes Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and brake shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Pads Equal Pressure Hot Press Machines are the most advanced type press machines used for making OE qualified high end passenger car brake pads, with its high production efficiency, and good production quality. The machine adopts advanced floating cylinder design to ensure that each brake pad in the same mold is subject to the…
Brake Pad Backing Plates Glue Spraying Booth is assembled from several units including painting room, painting system, spray gun transmission device, tray transmission system, exhaust gas treatment system, etc. Main Configuration and Technical Parameters: Painting room size: 2600×1840×1910mm Chain center distance: 650mm Operating height: 800±50mm Glue supply method: Pneumatic agitator prevents glue from settling, peristaltic…
Motorcycle Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
Automatic Motorcycle Brake Shoes Weighing and Pressing Machine Group is made up of three machines, including the hot press machines, material weighting and feeding machine, and the automatic loading robot hand. It reduce the workers to operate the machines, which save the labor cost and also guarantee a safety during production. A: Automatic Material Weighting&Feeding Machine…
CV Brake Lining Out Arc Grinding Machine is used to grinding on the out arc surface of CV Brake Linings with high working efficiency. “L” shape body structure, shorten the length of the mill spindle, increase the rigidity of it. Decrease the height of working table and worker’s intensity. Speed promise, also can fine tuning, and its high…