Automatic Brake Lining Hole Drilling Machine is used for drilling rivets holes of CV brake lining automatic.It realizes automatic feeding, automatic clamping, automatic indexing, automatic rotation, automatic drilling, automatic cutting, and automatic stacking. One worker can operate 3 to 4 machines. Technical Parameters：
Motorcycle Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Motorcycle Brake Pad Machines
Motorcycle Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Brake Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide Block Speed: Fast Down (200mm/s); Slow Down(60mm/s); Slow Close Mould…
Car Brake Shoe Lining Inner Arc Grinding Machine for the internal radius of brake cutting linings, which can process an accurate size and qualified surface on the inner surface of cutting linings, to provide a good combination performance of the Brake Linings. Technical Parameters： Linings Process Range: Diameter＞60mm Feeding Speed: 1.7m/minute Main Axle Power: 3KW/2880…
Car Brake Pads Slot and Chamfering Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880…
Brake Pads Friction Materials-Nitrile Butadiene Rubber(NBR) also known as Butadiene Acrylonitrile rubber, is a widely used friction material adhesive, with good cold resistance, abrasion resistance, oil resistance, and elasticity. Rubber powder works not only as the binder, but also as an inorganic filler in the friction materials. It can be evenly mixed with resin to…
Brake Pad Back Plates Production Machine is a punch machine for produce brake pad back plates with higher prdocution efficiency and stable working. Technical Specifications: Sliding Block Pressure: 1100KN Sliding Block Stroke:180mm Stoke Numbers:50 times/min (fixed);35-50 times/min (alterable) Die Height:350mm Die Height Adjustment:90mm Dimension From Slider Centreline to Machine:350mm Slider Base Size:620mm (L/R)*520mm(F/B) Shank Hole…
Motorcycle Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates…