Car Brake Shoes Steel Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
Automatic Motorcycle Brake Shoe Casting Machine is an group of machines for motorcycle brake shoe die casting production, with high automation and formance. Technical Parameters: Hydraulic Working Pressure:14 MPa Clamping Force:2000 KN Space Between Tie Bars:480*480mm Tie Bar Diameter:Φ85mm Die Opening Stroke:380mm Injection Force(intensify) :270 KN Plunger launch distance:135mm Injection position:0-140mm Plunger Diameter:￠50—-￠70 mm Injection…
Car Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
Brake Pads Friction Materials- Synthetic Graphite|Artificial Graphite can be used as basic raw material for brake pads producing and manufacturing. It has the characteristics of elasticity, reduced resistance and lubricity, environmental friendliness, absorbability to liquid adhesives, fusion with water, oil and adhesives. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Particle Size: 0-1.0mm/0-0.2mm/0.15-1.0mm/customized PHYSICAL PROPERTIES Specific Gravity（g/cm3） 2.21 Apparent Density（g/cm3） 1.19 Moisture…
Brake Pads Plough-Chopper Friction Materials Mixer applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…
Car Brake Shoes Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Car Brake Shoes Machines
Car Brake Pads Riveting Machine is used for riveting some kits on the finished brake pads, such as wear indicator plate, retaining clips after code printing before package. Technical Parameters： Work Pressure: 5-10MPa Effective Travel:100mm Height:210mm Riveting Span:220mm Power: 1.1KW/380V Dimension: 640×520×1030 mm Weight: 140Kg Click To See More Brake Pad Machines
Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters： Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
Motorcycle Brake Lining Cutting Machine is a special equipment to cut brake shoe linings into small pieces to meet different dimension requirements. Specification： 1. Blade Diameter 150mm 2. Total: 13 blades 3. Diameter: R85-120mm 4. Motor power: 4KW 5. Adjustable lining cutting width Click To See More Motorcycle Brake Shoes Machines