Brake Pads Electrostatic Powder Coating Line applies Infrared Heating Technology, which is 30-50% energy saving compared to electric heating technology with same electric power, the ordinary electric heating tunnel applies heat conduction to transfer the heat energy to brake pads, however, the infrared heating tunnel applies thermal radiation by special short and medium infrared waves…
Motorcycle Finished Brake Shoe Side Grinder is used to grinding the both sides of finished Brake Shoes to clean the surface. Technical Parameters： Grinding Motor: 2 KW Motor Speed: 2880 times/minute Chain Motor:75 KW Machine Size: 1500mm*700mm*1200mm Click To See More Motorcycle Brake Shoes Machines
Brake Pads Friction Materials-Silica Powder, is also purified from siliCarenite or sand stone. It is widely used as an inorganic friction raw material filler. Silica powder improves the friction products’ wear resistance, as well as the friction coefficient. Silica is a high Mohs scale of hardness filler, it need to be grinded into very small…
Brake Pads Friction Materials Titanates-Potassium Magnesium are widely used in the production of automotive ceramic brake pads, train Brake Shoes and clutch friction plates. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Diameter(μm)：2-10μm D97(µm)：18-25μm APPEARANCE Shape： Flaky Particles Color： Ivory Yellowish White PHYSICAL PROPERTIES Specific gravity(g/cm3): 3.7±0.1 Bulk Density(g/cm3):0.6-1.1 Moisture Rate(%): ≤1.5% Melting point (℃): >1300℃ Hardness(Mohs): 4.0 PH 8.0-11.0 CHEMICAL COMPOSITION Composition TiO2 MgO K2O Others Rate（%w.t.）…
PRODUCTION DESCRIPTION： Brake Pads Friction Material-Fiber Steel Wool is a friction raw material filler, can be used in all kinds of friction materials. It can provide the friction products excellent stable performance over a wide temperature range, with low wear rate and good heat dissipation. Chopped steel fiber is made from high quality low carbon…
Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Motorcycle Finished Brake Shoe Tunnel Type Oven is used to combined the brake shoe and friction linings by heating in the hot oven, Technical Parameters： Total Power: 90 KW Machine Size: 21000mm*1150mm*1300mm Heating Pipe: Stainless Heating Pipe Transfer Type: Mesh Conveyor Wind Motor: 0.37KW*5 Temperature: Automatic PLC Control Production Capacity: 3000 sets/8 hours Click To…
Car Brake Shoe Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings, and it is highly working conditions and efficiency. Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide…
