Brake Pad Back Plates Punch Machine is a machine for brake pad back plates production, it can be used for punching holes, pins, sides and fine blanking. Technical Specifications: Sliding Block Pressure: 1600KN Sliding Block Stroke:200mm Stoke Numbers:45 times/min (fixed);30-45 times/min (alterable) Die Height:400mm Die Height Adjustment:100mm Dimension From Slider Centreline to Machine:400mm Slider Base…
Brake Pads Friction Materials-Flake Graphite/Natural Graphite Powder is probably the most familiar of the natural graphite materials. Most people are familiar with the finely powdered graphite used as a lubricant, or the “lead” in pencils. Both of these products typically contain flake graphite. As the name implies flake graphite has a distinctly flaky or platy…
Car Brake Shoes Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Car Brake Pads Slanted Slot and Chamfer Machine is used to process the special slant slot and chamfering on brake pads with automatcally. Technical Parameters： Size of the machine(L x W x H): 2200mm x 1200mm x 1500mm Weight: 1.5 Ton Productivity: 600 pcs / hour Slotting: 2 x 4KW motors (2900/min), Ø250 diamond cutter…
Automatic Brake Lining Hole Drilling Machine is used for drilling rivets holes of CV brake lining automatic.It realizes automatic feeding, automatic clamping, automatic indexing, automatic rotation, automatic drilling, automatic cutting, and automatic stacking. One worker can operate 3 to 4 machines. Technical Parameters：
CV Brake Pads Cleanning Machine Before Powder Coating is used to clean the back plate side of brake pads before powder coating, to guarantee a smooth coating performance. Technical Parameters Production Capacity: About 3000 pcs/hour Speed: 9 meters/minute Brush: 3 Pcs Brush Motor: 1.1kw*3 Transport Motor: 0.75kw Dust Collect: Seperately for single brush
Brake Pads Friction Materials- Rock Wool Fiber Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus…
Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled. –…
Brake Pads Back Plates Roller Gluing Machine for brake pad back plates, which includes three parts in this machine, which is widely used in brake pad factory, with a higher production efficiency, and good gluing performance. Technical Parameters： – ROLLER GLOWING MACHINE Adhesive Machine Infrared Heating Tunnel Fan Cooling Tunnel – ADHESIVE PART : Gluing…