CV Brake Pad Back Plates Punch Machine is a punch machine for producing the CV brake pad back plates, can be connected with mechanical robots. Technical Specifications: Sliding Block Pressure: 5000KN Sliding Block Stroke:200mm Stoke Numbers:22 times/min (fixed) Die Height:500mm Die Height Adjustment:130mm Dimension From Slider Centreline to Machine:450mm Slider Base Size:820mm (L/R)*500mm(F/B) Shank Hole…
Brake Pads Backing Plates Ultrasonic Clean Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification: – Size:L8565*W2120*H1290mm – Load and Lay Off Material Platform (Length/Width):Each With 500×440mm – Cleaning Tank Inner Size:L2300×W440×H200mm – Spray Rinse Inner Size:L800×W440×H150mm – Compressed Air Cutting Water Inner Size:L600×W440×H150mm – Hot Oven Inner Size:L2998×W440×H150mm – Conveyor Belt Width:400mm – Liquid Storage Tank:L700*2…
CV Brake Pads Cleanning Machine Before Powder Coating is used to clean the back plate side of brake pads before powder coating, to guarantee a smooth coating performance. Technical Parameters Production Capacity: About 3000 pcs/hour Speed: 9 meters/minute Brush: 3 Pcs Brush Motor: 1.1kw*3 Transport Motor: 0.75kw Dust Collect: Seperately for single brush
Car Brake Shoe Lining Cutting Machine is used to cutting the Brake Linings into pieces according to parts sizes. Technical Parameters： Electric Power: 380V 50HZ Production Capacity: 15 Cycles/Minute, Speed Adjustable. Cutting Knifes: Diamond Cutting Knifes Fixtures: 45# Steel Electric Motor: Cutting Axle 5.5KW, Mold Axle 0.55KW. Processing Accuracy: -Cutting Width:≤0.10mm -Parallelism Between Cutting Axle…
Introduction: Brake Pads Backing Plates Cleanning Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification Size:L8565mm*W2120*H1290mm Load and Lay Off Material Platform (Length/Width):Each With 500×440mm Cleaning Tank Size:L2300×W440×H200mm Spray Rinse Size:L800×W440×H150mm Compressed Air Cutting Water Inner Size:L600×W440×H150mm Hot Oven Size:L2998×W440×H150mm Conveyor Belt Width:400mm Liquid Storage Tank:L700*2 Voltage:220V±15`HZ;380V±15% 50HZ Ultrasonic…
Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the temperature…
CV Brake Lining Laser Printing Machine is used for printing all kinds of logo and words on the surface of finished Brake Pads, pc brake shoe linings, cv Brake Linings, anti-noise shims as well as backing plates. It’s clean, safe and fast, and can be connected into the automatic production line with other machines. Technical…
Motorcycle Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Car Brake Shoes Automatic Packing Line is used for packing finished Brake Pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…